NTN FLAWBC3-9ZA deep groove ball bearings

d:31.75 mm; Designation of bearing:UC207-20G2L4; N:M10; Designation of housing:PAE207-; T max.:100 °C; A:45 mm; J:82.6 mm; A1:27 mm; H2:93 mm; B:42.9 mm;

Designation of housing:PE210N-; S:10.9 mm; Recommended tightening torque for set screw:11.5 Nm; A:54 mm; H:57.2 mm; J:158 mm; Designation of bearing:US210G2; L1:61 mm; H2:115 mm; B:43.5 mm;

Bearing Series:207 Series; Ship Weight:3.55 LB; Self Aligning:Yes; d:30.0000 in; Retainer Type:Max Life Cage; Brand:Baldor-Dodge; Bearing Inner Ring Material:Steel; Ball Bearing Housing Series:207 Series; Manufacturing Plant Location:Crossville, TN - DC; Bearing Duty:Normal Duty;

N:12mm; e:16 mm; L:95 mm; B:34 mm; S:14.3 mm; J:70 mm; s1:17 mm; G:M6x1; A1:13 mm; Weight:0.81 kg;

Dz:80 mm; L:92 mm; e:20 mm; Weight:1.27 kg; N:14mm; s1:36.3 mm; G:R1/8"; d1:51.1 mm; C:25.7 kN; A2:52.3 mm;

Bearing Insert Material:Steel; Expansion Type:Non-Expansion; Bearing Locking Device:N/A; Brand:Baldor-Dodge; Bearing Bore Shape:Round; Housing Coating:No Coating; Base to Center Height:Not Applicable; Ship Weight:1.82 LB; Housing Type:Type B Babbitted Tak; Metric Housing Dimensions:NO;

Shaft Attachment (2):Set Screw; Ship Weight:2.48 LB; End Cap Groove:No; Bearing Insert Material:Steel; Bearing Locking Device:Setscrew; Flinger Material:None; Seal Type:Single Lip; Housing Coating:Powder Coat; Base to Center Height:Low; Flinger Type:None;

Characteristic cage frequency, FTF:0.42 Hz; r1a max:1 mm; Mass (without HJ ring):0.81 kg; Characteristic outer ring frequency, BPF0:7.19 Hz; Max operating temperature, Tmax:120 °C; D:100 mm; da max:65 mm; da min:61.5 mm; Nlim (grease):5,600 rpm; Min operating temperature, Tmin:-20 °C;

A5:32.6 mm; C:35.1 kN; A2:40 mm; T max.:100 °C; E:24 mm; H:110 mm; A:40 mm; L:145 mm; S:19 mm; Designation of housing:EHE210-;

A1:15 mm; J:130 mm; S:11.8 mm; Z:68.6 mm; B:45.3 mm; G:R1/8"; T min.:-20 °C; C:43.55 kN; Designation of open end cover:SCOU211-35; d:55.56 mm;

e:15 mm; A:25.5 mm; G:M6x1; B:31 mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; J:64 mm; T min.:-20 °C; S:12.7 mm; C:12.8 kN;

A4:37 mm; Recommended tightening torque for set screw:8 Nm; A1:13 mm; d1:67.2 mm; B1:43.7 mm; C0:23.2 kN; G:R1/8"; A:41 mm; L:116 mm; Designation of bearing:ES210-31G2T20;

s1:15 mm; Weight:1.11 kg; d:30 mm; S:8 mm; Designation of open end cover:SCO206-30; N:14mm; J:118 mm; H1:17 mm; A1:25 mm; C:19.5 kN;

B:21 mm; D:100 mm; Da max:92 mm; Nlim (oil):7,100 rpm; Min operating temperature, Tmin:-20 °C; Static load, C0:10 kN; Brand:NTN; Y1:3.2; Mass:0.7 kg; Precision class:P0;

Dz:80 mm; T min.:-40 °C; J:68 mm; Weight:1.59 kg; Designation of bearing:UC207-22G2T04; S:17.5 mm; L:100 mm; N:M12; H:47.6 mm; T max.:100 °C;